亲子乱高潮1000部,色婷婷五月综合亚洲小说,禁伦H肉高辣网站视频,亚洲成av人影院

粉體行業在線展覽

產品

產品>

干燥設備>

盤式干燥機

>PLG系列盤式連續干燥機

PLG系列盤式連續干燥機

PLG

直接聯系

常州市佳發制粒干燥設備有限公司

常州

產品規格型號
參考報價:

面議

品牌:

常州佳發

型號:

PLG

關注度:

7382

產品介紹

概述:

★盤式連續干燥器是一種高

效的傳導型連續干燥設備。其獨特的結構和工作原理決定了它具有熱效率高、能耗低、占地面積小、配置簡單、操作控制方便、操作環境好等特點,廣泛適用于化工、醫藥、農藥、食品、飼料、農副產品加工等行業的干燥作業。在各行業使用實踐中深受好評。先生產制造常壓、密閉、真空三大類型,1200、1500、2200、3000四種規格,A(碳鋼)、B

(接觸物了部分均勻不銹鋼)、C(在B的基礎上,增加蒸汽管路,主軸及支架為不銹鋼,筒體和頂蓋內襯不銹鋼)。三種材質,干燥面積4-180 ,共幾百種型號的系列產品,并提供與之相配套的輔助設備,可滿足用戶對各種物料進行干燥的需求。

PLG series continuous plate drier is a kind of high efficiency conducting and continuous drying equipment. Its unipue structure and operating principle provide advantages of high heat efficiency ,low energy consumption, less occupying area, simple configuration, easy operation and control as well as good operating environment etc, it is widely used    in drying process in the fields of chemical, pharmaceuticals, agricultural chemicals, foodstuff,feed,agricultural prouct and by products processing etc. and is well received by various industries. Now there are there big categories, normal pressure, closed and vacuum styles and four specifications of 1200,1500,2200and 3000,and three kinds of medium A(carbon steel),B(stainless steel for contact parts) and C(on the basis of B to add stainless steel for steam pipes, main shaft and support,and stainless steel linings for cylinder body and top cover).With a drying area of 4 to 180 square meters, now we have hundreds of models of series rrouducts and various kinds of auxiliary devices available to meet requirements of various pround

原理:

★濕物料自加料器連續地加到干燥器上部**層干燥盤上,帶有耙葉的耙臂做回轉運動使耙葉連續地翻抄物料。物料沿指數螺旋線流過干燥盤表面,在小干燥盤上的物料被移送到外緣,并在外緣落到下方的大干燥盤外緣,在大干燥盤上物料向里移動并從中間落料口落入下一層小干燥盤中。大小干燥盤上下交替排列,物料得以連續地流過整個干燥器。中間的干燥盤內通入加熱介質,加熱介質形式有飽和蒸汽、熱水和導熱油,加熱介質由干燥盤的一端進入,從另一端導出。已干物料從*后一層干燥盤落到殼體的底層,*后被耙葉移送到出料口排出。濕份從物料中溢出,由設在頂蓋上的排濕口排出,真空型盤式干燥器的濕氣由設在頂蓋上的真空泵口抽出。從底層排出的干物料可直接包裝。通過配備翅片加熱器、溶劑回收冷凝器、布袋除塵器、干料返混機構、引風機等輔機,可提高其干燥的生產能力, 干燥膏糊狀和熱敏性物料,可方便地回收溶劑,并能進行熱解和反應操作。

Wet materials are fed continuously to the top drying layer in the drier. They will be turned and stirred continuously by harrows’ s arm rotates, the material flows through the surface will be moved to its exterior edge and drop down ti the exterior edge of the large drying plate underneath, And will then be moved inward and drop down form its central hole to the small drying plate on the next layer. Both small and large drying plates are arranged alternately so as materials can go through the whole drier continuously. The heating media, which could be saturated steam, hot water or thermal oil will be led into drying plates from one end to other end of the drier. The dried product will drop from the last layer of the drying plate to the bottom layer of the body, and will be moved by harrows to the discharge outlet. The moisture exhausts from materials and will be removed from the moist discharge outlet on the top cover, or sucked out by the vacuum pump on the top cover for vacuum-type plate drier. The dried product discharged form the bottom layer can be cover for vacuum-type plate drier. The dried product discharged from the bottom layer can be packed directly. The drying capability can be raised up if equipped with supplementary devices such as finned heater, condenser for solvent recovery, bag dust filter, return and mix mechanism for dried materials and suction fan etc. solvent in those paste state and heat sensitive materials can be easily recovered, and thermal decomposition and reaction can be also carried out.

技術參數:

    規格

    Model

    外徑(mm)

    Diamter

    高度(mm)

    High

    干燥面積(m2)

    Area of dry

    功率(kw)

    Power

    1200/4

     

    1850

    2608

    3.3

    1.1

    1200/6

    3028

    4.9

    1200/8

    3448

    6.6

    1.5

    1200/10

    3868

    8.2

    1200/12

    4288

    9.9

    1500/6

     

     

    2100

    3022

    8.0

    2.2

    1500/8

    3442

    10.7

    1500/10

    3862

    13.4

    1500/12

    4282

    16.1

    3.0

    1500/14

    4702

    18.8

    1500/16

    5122

    21.5

    2200/6

     

     

    2900

    3262

    18.5

    3.0

    2200/8

    3682

    24.6

    2200/10

    4102

    30.8

    2200/12

    4522

    36.9

    4.0

    2200/14

    4942

    43.1

    2200/16

    5362

    49.3

    5.5

    規格

    Model

    外徑(mm)

    Diamter

    高度(mm)

    High

    干燥面積(m2)

    Area of dry

    功率(kw)

    Power

    2200/18

    2900

    6202

    61.6

    7.5

    2200/20

    6622

    67.7

    2200/22

    3800

    7042

    73.9

    11

    2200/24

    7462

    80.0

    2200/26

    4050

    48

    3000/8

     

     

     

     

     

    5782

    4650

    60

     

    13

    3000/10

    5250

    72

    3000/12

    5850

    84

    3000/14

    6450

    96

    3000/16

    7050

    108

    3000/18

    7650

    120

     

    15

    3000/20

    8250

    132

    獲取更多信息,請訪常州市佳發制粒干燥設備有限公司 網站

    產品咨詢

    PLG系列盤式連續干燥機

    PLG

    請填寫您的姓名:*

    請填寫您的電話:*

    請填寫您的郵箱:*

    請填寫您的單位/公司名稱:*

    請提出您的問題:*

    您需要的服務:

    發送

    中國粉體網保護您的隱私權:請參閱 我們的保密政策 來了解您數據的處理以及您這方面享有的權利。 您繼續訪問我們的網站,表明您接受 我們的使用條款

    PLG系列盤式連續干燥機 - 7382
    常州市佳發制粒干燥設備有限公司 的其他產品

    © 2025 版權所有 - 京ICP證050428號

    聯系電話
    虛擬號將在180秒后失效,請在有效期內撥打
    為了保證隱私安全,平臺已啟用虛擬電話,請放心撥打.(暫不支持短信)
    使用微信掃碼撥號
    是否已溝通完成
    您還可以選擇留下聯系電話,等待商家與您聯系
    *需求描述:
    *單位名稱:
    *聯系人:
    *聯系電話:
    Email:
    (請留下您的聯系方式,以便工作人員及時與您聯系!)
    主站蜘蛛池模板: 板桥市| 青州市| 乐业县| 兰州市| 元江| 汝城县| 甘孜县| 陆丰市| 江口县| 诏安县| 蒲江县| 叶城县| 紫金县| 册亨县| 宁河县| 广丰县| 长乐市| 康平县| 克东县| 广丰县| 左权县| 囊谦县| 汉阴县| 白银市| 承德市| 砀山县| 武邑县| 双峰县| 武胜县| 平武县| 苍溪县| 木里| 温宿县| 乃东县| 慈溪市| 万山特区| 城口县| 石城县| 尼勒克县| 五指山市| 华安县|